Campbell Cabinet Door

Be the first to review this product

$0.00

SKU

CNSI-CAMP-CONFIG

Wood Type

Width

Height

Boring and Hinge Options

Optional Non-Standard Stiles and Rails Widths

Qty

Minimum Size: 7 1/2" x 7 1/2"
Maximum Size: 30" x 72"
Stiles and Rails are 2 1/4" standard.
Thickness: 1/4" Panel & 3/4" Frame
Center Rail Required at 50" and above
All Salice hinges shown on door pages are for 1/2" overlay
Shown in Alder Natural w/ clear finish
We cannot warranty doors with widths over 30" or heights over 72"

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

The Campbell door is a more complex variant of the Shaker door. The Campbell uses a step down routing pattern that helps to ease the depth transition visually and makes the doors seem to pop out from the frame even though it is an inset panel.

All Fast Cabinet Door products are hand-crafted in California and North Carolina, and are available in a variety of wood species, including Alder, Maple, White Oak, Red Oak. As such, each door will be consistently unique. In addition, the natural characteristics of wood lend themselves to color variation, and this is also true when finish is applied. Width of Stiles and Rails include Inside and Outside Edge Profiles.

Please note that this will arrive as unfinished wood and will need to have a finish applied before installation.

For ordering Lazy Susan corners:
Select 1 door without boring
Select 1 door with "Lazy Susan Boring + Hinge Assembly" under Boring and Hinge Options
See the Frequently Asked Questions page for more information For susan/corner cabinet doors, is recommended to square off the edges where the pair of doors will meet. If the doors have a standard beveled outer edge, they may produce a large gap. If you'd like us to square the edge of the doors where they meet, please contact us with instructions to use OE1 outside edge on one side of each door. This adjustment will cost an additional $30 per door.

Each hinge from the Boring and Hinge Options selection is a 1/2" overlay

More Information

More Information
SKU	CNSI-CAMP-CONFIG
Display Price	Starting at $19.50 per sq. ft.

Reviews

Write Your Own Review

We found other products you might like!

Campbell Cut for Glass
Starting at $15.21 per sq. ft.
Campbell Drawer Front
Starting at $17.78 + $10.00 Fee